Our 5 Highest Best Hitch Tightener for RV in 2020

Hitches tend to produce a rattling, uncomfortable noise. Buying a sturdy RV tightener is important to a great outdoor experience. For RVers, having a smooth towing is the ultimate feeling.
RV tighteners come in different forms. They range from sleeves and wedges to pins and are designed for other vehicles.
Read on to understand more about the best hitch tightener for RV;

Table of Contents

 Our Top 5 Picks

IMAGE



PRODUCT

StowAway Hitch Tightener


LIBERRWAY Hitch Tightener


CURT 22321 Anti-Rattle Hitch Pin


Mission Automotive Hitch Tightener


MAXXHAUL 50023 Tightener


StowAway Hitch Tightener

LIBERRWAY Hitch Tightener

CURT 22321 Anti-Rattle Hitch Pin

Mission Automotive Hitch Tightener

MAXXHAUL 50023 Tightener

Best RV Hitch Tightener Of 2020

Editor’s Pick-StowAway Hitch Tightener

storyrv-StowAway-Hitch-Tightener

Highlights

storyrv-StowAway-Hitch-Tightener

Highlights

With high levels of reliability and performance, this universal tightener is suitable for almost all types of 1.25” and 2” hitches. For rough terrain, it holds the hitch firmly, preventing any rattling.

The tightener’s superior design surpasses its market counterparts. As long as it’s a 1.25” or 2” hitch, it tights perfectly, eliminating wobbling.

StowAway’s sturdy construction makes it suitable for heavy-duty towing. Even when tightened to its limit, the plate does not bend. Also, the U-bolt holds well on the sides and does not slip to loosen the fastening bolts.

Good For:

Bad For:

I give myself a one star rating for not buying this sooner. The plate is a 1/4″ thick so you do not have to worry about bending this thing, you will not have to gorilla torque it anyways. I had to set this up on the right side since my hitch does not extend past the rear bumper and because of the way Andersen MFG. makes their Rapid Hitch (short shank with the pin hole halfway down the length so there is no room for this tightener). After I tightened both nuts (flat and lock washers come with this fyi) I yanked and yanked on my hitch and it would not move any direction. I will update this review if I need to after I have my loaded trailer hooked up next week for a 1,300 mile road trip. That will be the real test.

    SwErVe

Best For Smooth Towing-LIBERRWAY Hitch Tightener

LIBERRWAY Hitch Tightener

Highlights

LIBERRWAY Hitch Tightener

Highlights

The Liberrway stainless steel hitch is the best for a balanced feel and a comfortable ride. Its compact design eliminates rattling and wobbling noises as well as hitch movement.

This hitch tightener to make RV trips silent when towing. To provide a cool ride, it tightens correctly, reducing any movement.

Ideally, this tightener can be installed with class 1-4 hitches. It’s compatible with many hitches for trucks, SUVs, trailers, and RVs.

Good For:

Bad For:

Does not fit on my 2013 F-150. There is not enough room under the rear bumper for the nuts and washers and will not work by turning it upside down and bolting from beneath.
After the manufacturer RETECK saw my negative review they contacted me and asked for details and photos of my hitch. The draw bar I use is short and has an upward curve in it. RETECK offered to send me a modified tightener customized to fit my hitch free of cost. I received the modified tightener today and installed it and it works perfectly. The tightener is very well made (as was the first one I was sent) and I never have received better customer service. The manufacturer is evidently very concerned with customer satisfaction. Therefore, I must change my review form one star to five stars.

 

Best for Reducing Rattling – CURT 22321 2″ Anti-Rattle Hitch

CURT-22321-Anti-Rattle-Hitch

Highlights

CURT-22321-Anti-Rattle-Hitch

Highlights

Designed for 2” hitch receivers, this anti-rattle hitch fits in RVs, trailers, and cargo carriers. It’s compatible with almost all hitch receivers with 2-inch shallow shanks. The CURT 22321 hitch also comes with a safety pin that ensures it doesn’t snap out even when loose.
Designed to provide quiet towing, this hitch holds the ball mount firmly. Therefore, it eliminates any vibrations that may sway the trailer and make a wobbling noise.
Another impressive feature is the solid steel construction, which is ideal for RVs. Not only is it highly durable, but it also makes towing quiet and safer. Besides, it has a zinc coating that shields it from water and dirt that might cause corrosion.

Good For:

Bad For:

I used this for my trailer hitch fold-down step attachment. It was rattling around in the hitch like crazy. This device installed in about one minute using a pair of vise grips and a socket set. Now my trailer hitch attachment is rock solid, and it does not wiggle nor make a sound while driving. I did have to use the vise grips to fold down a small metal tab on the device so it would fit inside the hitch accessory. No big deal, this was easy and took 3 seconds. Comes with hardened bolt, nut, and lock washer.

 

Highlights

Highlights

Being a very versatile hitch, this tightener was designed for heavy tasks. It tows a variety of vehicles, including minivans, SUVs, campers, RVs, and trucks. It eliminates trailer movement to enhance quiet towing.

The Mission Automotive hitch tightener is a good fit for class I-IV hitches measuring up to 2”. Thanks to the corrosion-resistant galvanized steel construction, it’s highly durable. Heavy-duty tighteners can tow for long without loosening.

Another great thing with this tightener is that it works with almost all hitch brands. Whether you are using a StowAway, Thule, or Saris hitch, this tightener comes in handy. Ideally, it was designed to fit all types of hitches in the market and can help a lot if you are planning to haul for long distances.

Good For:

Bad For:

I put this on in early spring and take it off in late fall. It’s finishing it’s third year, with no issues. I use it on an ATV hauler, the trailer and vehicle can be up to 2400 lbs depending on the loading. This tightener stops all the clanking and backlash – so much nicer a ride without all that going on back there.

I make sure to tension the hitch mount so that when the tightener is clamped on, there’s no play to be taken up by the mount changing position when first loaded. Another good idea is to put it on loosely and tighten it up once the trailer is hooked up, and stretched out.

There are some negative reviews – this is not something that lifts up a hitch mount carrier device, it’s not meant to carry a lot. Steel will bend, and it’s not made to lift a sag, it’s just meant to stabilize. And at that, it’s very good.

No excessive rust or problems, it goes on every year and keeps things quiet. Good stuff

 

Best Budget TightenerMAXXHAUL 50023 Tightener

MAXXHAUL-50023-Tightener

Highlights

Highlights

Featuring heavy-duty industrial-grade bolts, washers, and a coated plate, this is a low-budget tightener. It goes for less than $10 and features heavy-duty performance and high reliability. It’s instrumental in eliminating wobbling and rattling in class I- IV hitches.

You can always count on its versatility for various applications such as cargo carriers and bike racks. Besides reducing rattling,  it prevents tilting that might cause difficult towing. Whether you are towing on the highway or passing through rough trails, it provides a firm grip.

If you are looking for quiet RV towing, this tightener comes in handy. All you need is to ensure it’s well installed, and there is no movement. With it, you can travel thousands of kilometers problem-free.

Good For:

Bad For:

I have been paying a local retail over-priced shop to do my brakes on my vehicles for 15-20 years and their prices have gone up and the quality of the brake jobs go down. I have to go back and have them fix isues with the pads rubbing or mis-aligned yielding in noise and annoying squeals. Well, after getting a ridiculous quote for my last brake job where they tried to sell me I tow very rarely but the last time I did a longer tow the rattling drove me nuts. Bought this brace and it was silent towing this time around. Easy to install and take off to store when not in use. Best towing accessory I have. Don’t bother with the anti rattle crap that goes into the receiver, I have it and it doesn’t work like this does.

RV Hitch Tightener FAQs

What is a Hitch Tightener?

A hitch tightener is a tool that fastens both the hitch and the receiver to allow for smooth towing. It reduces hitch movement and the rattling noises that come with it. A hitch tightener can be used on different vehicles, from RVs and trucks to trucks.

How Do I Stop My Hitch from Wobbling?

Hitches wobble unsteadily from side to side when not firmly tightened. The connection between a hitch and a receiver is not always tight, hence the wobbling. To prevent this, look for a sturdy hitch tightener to hold this connection together. With any of the above products, wobbling will never be a problem when towing an RV.

How Do You Tighten a Trailer Hitch?

Rattling on your trailer hitch might be caused by a clearance between the drawbar and the hitch receiver. You can tighten the connection under the hitch with a socket. Alternatively, you can use a hitch tightener suitable for your hitch and firmly hold it against the receiver.

How Do You Install a StowAway Hitch Tightener?

Installing a stowaway hitch tightener is a simple process. All that you have to do is slide the U-bolt over the stinger and slide the plate onto it. Slide in the washers and fastening bolts before tightening firmly using a wrench.

When installing a stowaway hitch, you should be careful not to place the tightener plate upside down. When not fixed properly, it doesn’t hold firmly.

How Do You Install an Anti-Rattle Hitch Tightener?

First, insert the bracket into the hollow shank. Then, slide in the accessory such that its pinhole corresponds to that of the bracket. Insert the threaded pin and fasten it with a wrench. On the other side, secure it with the security pin.

Recommended StowAway Hitch Tightener | Final Words

As long as you have a sturdy, reliable hitch tightener, you will never experience any wobbling. It helps minimize the hitch movement. Hitch tighteners are easy to install. With so many options to choose, finding one should be a simple task.

The StowAway hitch tightener is indeed the best product. Its rigidity and durability are on another level.

When choosing a hitch tightener, there are critical factors to consider. These include reliability, performance, and compatibility. The StowAway hitch tightener is a clear winner in all of these factors. Besides, it’s easy to install and provides the best grip possible.